TimeTec Security App
User Guide for
Smart Alarm
 

List of guides:

• Before Configuration
• Register Account In TimeTec Security App
• Add Controller
• Configure Controller
• Add Sensors
• Secure Zones
• Arm Modes
• Dashboard
• Manage Users
• Manage Access Group
• Create Temporary Access


 
Before Configuration
To install TimeTec Smart Alarm is extremely easy. You don't need technical expert to do it.
Make sure your controller is power on by DC power, remote and sensors are ready with batteries then you are all good to start configure the system.

  Back to top



Register Account In TimeTec Security App
To start using TimeTec Security App, you will need to register an user account.
1. Tap Sign Up
2. Select if this access is for business or personal use.
3. Fill in all the fields and tap "Register"
4. You will receive an activation email once registration is successful. Please activate your new account from the email before you start to use TimeTec Security.


Add Controller
Firstly, sign in and start add the controller of your alarm into your system. Make sure you stand near to the controller when you are adding it into your listing, bluetooth function of your smart phone must be switched on.
1. Tap menu > "Smart Alarm" > "Controller"
2. Tap "+" to add controller.
3. Scan the QR code sticker on the controller or tap "Manual Insert" to type the serial number manually.
4. Manually type in the serial number and we suggest to name it using location.
5. Controller has been added to your app.
  Back to top



Configure Controller
After you have added controller to the system, you need to configure it.
1. Tap on the controller.
2. Insert the pairing code of your controller, you can find it on the sticker on your controller.
3. You will have 3 chances to insert the pairing code.
4. If you have failed to insert the correct pairing code for 3 times, you will need to wait for 15 minutes to try again.
5. After you have inserted the correct pairing code, you will reach this configuration page. Fill up all the fields to set up your controller.
  Back to top



Add Sensors
After adding the controller to your app successfully, the next things you should add are the sensors.
1. Tap "Menu" > "Smart Alarm" > "Sensors"
2. Tap "+" to add sensor.
3. App will scan sensor nearby.
4. Tap on the detected sensor.
5. Fill in all the fields.
6. After sensors are added they will be displayed like this. To remove, slide the sensor to the left and tap "dustbin" icon.
  Back to top



Secure Zone Setting
Change your secure zone settings to suit your requirements.
1. Tap "Menu" > "Smart Alarm" > "Secure Zones"
2. Tap on the secure zone that you want to change settings.
3. Change the delay timer according to your need.
  Back to top



Arm Modes
You can also do different settings for different arm modes.
1. Tap "Menu" > "Smart Alarm" > "Arm Modes".
2. Tap on arm mode to view the corresponing secure zone and sensor.
3. This is how "Stay mode" looks like.
4. This is how "Away mode" looks like.
5. You can also customize your own mode in "Customize mode".
  Back to top



Dashboard
After all settings have been done, you can start using Smart Alarm at your ease. Monitor your protected premises at Dashboard and have the safety in control!
1. Tap "Menu" > "Smart Alarm" > "Dashboard"
2. Monitor and control your smart alarm system from here wirelessly!
  Back to top



Manage Users
As the owner of an alarm system, you can add admin or user to your system. To do that, you need to add them by "Manage User" first. The user will receive an invitation email from you, that prompt them to download TimeTec Security App and register an account using the app. After the user registered and activated their account, his/her name will be listed in user list that you can assign role to them for your system. Being an "admin" enables them to add more users for the system, for "user" role, users cannot add any user but merely can control the system. Please follow the steps below:
To invite users
1. Tap "Menu" > "Manage Users"
2. Tap "+" to add user
3. Fill up name and email of the user who you want to invite.
4. An invitation has been sent to the email. Tab "Add more" to continue adding user.
To delete user
1. This is the page when you have successfully invited 3 users. The "P" in red circle means "Pending account activation".
2. Swipe left at the particular user and you will see a "dustbin" icon. Tap on it to delete the user.
3. You have successfully removed Peter Doe. Meanwhile, when a user has created and activated his/her account, there is no red circle "P".
Add admin/user to a particular system
1. Go to the alarm device that you want to add user by : Menu > Smart Alarm > Configure Access > Choose BLE-2 Device > Manage Users
2. Tap on "+" at Admin to add an admin. If you are adding to a user, tap on "+" at User.
3. The user who has created and activated his/her account will be listed here, select the user by ticking it and then tap the bigger tick at right top corner.
4.You have successfully added a new admin.
Change role of an admin (same way to change role of an user)
1. Swipe left at the particular admin that you want to change role.
2. Tick "pencil" (edit) icon to change role, if you want to remove him/her, tap "dustbin" icon to delete.
3. Tap OK.
4. You have successfully changed Mary's role from "admin" to "user".
  Back to top



Manage Access Group
If you want allow someone to access your Smart Alarm, for eg. your part time cleaner who will come clean your house daily at certain time, you can do it by create an access group. You will need to invite your cleaner to create and activate his/her account in TimeTec Security first (follow steps in "Manage User" > "Invite User" above)
1. Tap "Menu" > "Smart Alarm" > "Configure Access" > Choose BLE-2 Device > "Access Group"
2. Tap "+" to create access group
3. Name the schedule and set the time frame for each day. Tap "Full Day" if you want to allow full day access.
 

4. Tap the "User" when you have done the time and day settings.
5. Tick user for this schedule. If you do not find the user in this list, check into "Manage User". You might forget to add the users to the Alarm system.
6. You have successfully created schedule for "Cleaner". You can delete it by swiping the schedule to left.
7. Tap on the dustbin icon to remove it.
  Back to top



Manage Temporary Access
To create temporary access for someone, you can do it in "Temporary Access".
1. Tap "Menu" > "Smart Alarm" > "Configure Access" > Choose BLE-2 Device > "Temporary Access"
2. Tap "+" to create Temporary Access
3. Name the schedule and tap "access time".
 

4. Set the time frame for this temporary access.
5. Select user for this temporary access and tap the tick on right top corner.
6. You have successfully created this temporary access. You can delete it following step 7 in "Manage Access Group".
 

  Back to top

Note: If some of the screenshots or steps viewed here are different from the ones in the current system, this is due to our continuous effort to improve our system from time to time. Please notify us at info@timeteccloud.com, we will update it as soon as possible.